Information on operation, adjustment, repairs
and maintenance of Muldoon Positive Rear Steer
System
Pages - 1
| 2 | 3
| 4 | 5
| 6 | 7
| 8 | 9
|10 | 11
| 12 | 13
| 14 | 15
| 16 | 17
| 18 | 19
| 20 | 21
| 22 | 23
| 24 | 25
| 26 | 27
| 28 | 29
| 30 | 31
| 32 | 33
| 34
FIG 10
Tighten this
bolt (see FIG 11) while observing the pressure
gauge.
Keep tightening until the pressure gauge reads
zero. (see FIG 4c)
(Remember to release and remove the bolt after
repairs are completed).
FIG 11
If it is
desired to drain the oil from the accumulator,
then proceed as follows.
First place a container under the valve manifold
capable of holding at least 2 litres of oil.
Then slacken the bleed screw at the top of the
manifold, and press down on one side (see FIG
12).
Index
| Previous
Page | Next
Page
Page
10
|