Information on operation, adjustment, repairs
and maintenance of Muldoon Positive Rear Steer
System
Pages - 1
| 2 | 3
| 4 | 5
| 6 | 7
| 8 | 9
|10 | 11
| 12 | 13
| 14 | 15
| 16 | 17
| 18 | 19
| 20 | 21
| 22 | 23
| 24 | 25
| 26 | 27
| 28 | 29
| 30 | 31
| 32 | 33
| 34 If
not turn them to this position. Refit both
handles in line, without the locking pipe fitted
(see FIG 20) 
FIG 20
Turn
both handles to 90 degrees from this position
(FIG 21) 
FIG 21
(This
action allows the oil to flow through the valve
assembly and expel any trapped air).
Proceed to prime and bleed the system as
described in (D : PRIMING).
Finish operation by lining up front and rear
pointers (FIG 5 and 6). Then turn both handles
back in line and fit locking pipe (see FIG 22).
Index
| Previous
Page | Next
Page
Page
16
|